Description
Pressed steel cage. Dynamic load capacity 95,200 n. Static load capacity 21,400 lb. Medium m-type double-row ball bearing. This bearing is a maximum capacity double-row ball bearing with a filling notch on one side to permit assembling the maximum number of balls into the bearing. Contact angles converge outside the bearing. All inner and outer Rings have closure grooves. The m-type bearing has a very heavy radial capacity. It also has thrust capacity in one direction, with the ability to accommodate light thrust load in the reversing direction. Part numbers on m-type double-row bearings are normally located on either the side face or the O.D. Surface of the bearing. The side face marking is always on the side opposite the filling notch and the O.D. Marking is offset from the center away from the filling notch. Therefore, double sealed or shielded bearings with the filling notch covered from view can be oriented correctly.
- Polycarbonate sheets can easily be trimmed to your required width
- Designed for rain and light snow
- Can be used for residential and commercial applications
- Awnings have good weather resistance, safe, easy and ready to install
