Description
Improving your workplace��s air quality. Dimensions ÿ 20.5�� L x 20.5�� W x 9.8�� H | Electrical Requirements ÿ 115V, 60 Hz, 1.5 A | Air flow ÿ 1050/1350 CFM | Cover rooms up to ÿ 1700 sq. ft. | Noise rating ÿ 60 to 69 dB ��Strong Vortex fan��The Air Filtration System for Woodworking is equipped with a Strong Vortex fan, which generates a strong airflow when working, and can maintain a high static pressure state even if the filter covers a large amount of Wood chips. It has two-stage speed selection (1050/1350 CFM). Suitable for wood carving workshop, Woodworking, Garage. Ideal for wood carving, sanding, turning, scroll saw work, rotary tools, powder mixing, etc., it guarantees perfect results in terms of reducing indoor air pollution. The filter can be easily replaced. ��Accessibility���| Timer cycle controller, You can set fan to shut down automatically in 1-9 hours. �| IR remote system, there is no wireless interference, and the anti-interference ability is strong. After-Sales Team��Each AlorAir air filtration system has been strictly tested to ensure the perfect use of the product. It’s the pesky side of woodworking. And that’s where an air-filtration system comes to the rescue. This Purecare 1350 air filtration system, typically suspended from the ceiling, draws dust-laden air into the unit and through MERV-11 filters, exhausting (hopefully) clean air out the bottom. br br 1. Dimensions ÿ 20.5�� L x 20.5�� W x 9.8�� H | Electrical Requirements ÿ 115V, 60 Hz, 1.5A | Air flow ÿ 1050/1350 cubic feet per minute | Cover rooms up to ÿ 1700 sq ft. | Noise rating ÿ 60 to 69 dB br 2. It comes with 360 degrees Air Intake design that circulates the air in a 400-square-foot room up to 13 times per hour. br 3. Two-speed operation allows optimum airflow at a rate of 1050 or 1350 cubic feet per minute. br 4. The programmable timer automatically shuts the unit off after the set number of minutes. br 5. Includes four MERV-11 filters, which can be easily replaced. br 6. Details add convenience br Remote control. You can turn the unit on or off, control the fan speed, and even set a timer that turns it off automatically via a panel on the unit, or by remote control.
